| MP Rotator Nozzles |
| MP2000-90 | 2 |
| MP3000-90 | 4 |
| MPLCS515 | 1 |
| MPSS530 | 1 |
| MPRCS515 | 1 |
| Now we need Spray Heads for each of the Nozzles. |
| Spray Body (We recommend PROS04PRS40CV) | 9 |
| A Swing Assembly for Each Spray Head |
| SJ-506 | 9 |
| We now need our Connection Fittings for each of the spray heads. For this we will need to revisit our zone layout diagram. This is obviously very simple, but we will be using ¾” Perma-Lock fittings to make it even easier. We will however use Dawn Quick Tap Saddles for our in-line Spray Bodies (1,3,10,11,13, and 14), and Insert Fittings for our end of line Spray Bodies (2,9, and 12) | 
|
| KT007C – For the inline heads | 6 |
| BL407-101 – For end of line heads | 3 |
| That cover all we need for installing the spray heads and nozzles. Now we’ll move on to tubing and layout fittings. We will be using ¾” tubing throughout this design which would be common for a layout of this size. |
| BLP-075-CL-3X – 300 ft. Roll of ¾” Blu-Lock Tubing | 1 |
| We will now look at fittings for the tubing. In this example there are very few fittings required and they are simple to see. For sharp corners we need elbows and for T’s for Tee’s. All Blu-Lock fittings can be found HERE. |
| ZONE 1 | |
| BL406-007 – ¾” Blu-Lock Elbow | 5 |
| ZONE 2 | |
| BL406-007 – ¾” Blu-Lock Elbow | 1 |
| BL401-007 – ¾” Blu-Lock Tee | 1 |
| Timer and Connection Fittings |
| Hose End Water Timer– 2 Zone Hose End Timer | 1 |
| DD-FH4 – Swivel Hose thread to Male Pipe Thread Connection | 2 |
| BL435-007 – ¾” Female Adapter | 2 |
| BL406-007 – ¾” Blu-Lock Elbow (you may need a few more of these for direction from the timer. | 2 |
| Cutting Tool | 1 |
| 882-180 – 18” Riser – You may use this to increase the height of Nozzle 13 to bring it above plants and shrubs. | 1 |
