RAISED BED B - Raised Bed Kit Using Micro Emitter Tubing 8 Bed Layout

Product Description

This raised bed drip irrigation kit contains everything you will need to go from hose bibb (faucet) into your raised garden beds.  See sample layout below.

To expand the kit see layout illustration and order parts necessary.  

Maximum Length of a single run of emitter tubing 19 ft

Maximum Flow Rate Required when kit is fully installed (all drippers and soaker hose): 90 gph

Minimum of 15 PSI required to run this kit effectively.

Included in the Kit*:

	Qty	Item	Part #
Water Source Connection Fittings
	1	Y Filter 3/4" 150 Mesh	A4-HTF155
	1	Pressure Regulator 25 PSI	DD-HPR25
	1	Direct-Loc Swivel Adapter	DL-FHS600
1/2 Tubing Directional and Raised Bed Connection Fittings
	16	Direct-Loc Elbow	DL-L600
	7	Direct-Loc Tee	DL-T600
	2	Direct-Loc Coupling	DL-C600
	8	Perma-Loc Flow Control	DL-FCV600
	8	Direct-Loc End Cap	DL-EC600
	1	1/2" x 100' .700 OD Poly Tubing	DD-DH700-100
	20	1/2" Tubing Mounting Clamp with Nail - Black	DD-MC700B
	1	Hole Punch	DD-KP
	50	1/4" Barbed Connector	DD-C250
	2	1/4" x 100' Soaker Hose Dripline 6" Spacing 1/2 GPH	DD-DET250-6-100
	50	Goof Plug	DD-GP
	100	Micro Tubing Holder Stake 6"	DD-S2
	2	Wire Stake- 25 Pack	TLS6

*See "Product Options" to Add-on Timers

Click Here for Timer Details

Set Up Illustration

Shown with Y Splitter to divide the system in two.

Optional YBV Connection for Flow Control (comes with Kit)
	1	Y Ball Valve (2 outlets) 3/4" Female Hose x 3/4" Male Hose	DD-YBV75
	1	Direct-Loc Swivel Adapter .600 ID DL x 3/4" FHT Swivel - 700	DL-FHS600

For installation instructions click here

NOT INCLUDED IN KIT (Additional Optional Products):

	Description	SKU
	Tubing Cutter	TL-TC100
	Punch and Cutter	ANT-PNC
	Vacuum Breaker	DD-HVB
	Deluxe Hole Punch Tool	DD-HP250
	Super Punch	DD-SP250
	Replacement Filter 150 Mesh for 3/4" & 1" Y Filters	A4-SS155
	Replacement Filter 200 Mesh for 3/4" & 1" Y Filters	A4-SS200
	Hose Washer	DD-HW