RAISED BED B PLUS - Raised Bed Kit Using Micro Emitter Tubing 8 Bed and 35 Individual Plants Layout

Product Description

This raised bed drip irrigation kit contains everything you will need to go from hose bibb (faucet) into your raised garden beds.  See sample layout below.

To expand the kit see layout illustration and order parts necessary.  

Maximum Length of a single run of emitter tubing 19 ft

Maximum Flow Rate Required when kit is fully installed (all drippers and soaker hose): 90 gph

Included in the Kit*:

	Qty	Item	Part #
Water Source Connection Fittings
	1	Y Filter 3/4" Female Hose Swivel x Male Hose 150 Mesh Stainless Steel Screen	A4-HTF155
	1	Pressure Regulator 25 PSI - Hose Threaded 3/4" FHT x 3/4" MHT - Economy Model	DD-HPR25
	1	Direct-Loc Swivel Adapter .600 ID DL x 3/4" FHT Swivel - 700 or 710 Tubing	DL-FHS600
1/2 Tubing Directional and Raised Bed Connection Fittings
	18	Direct-Loc Elbow .600 ID DL x DL - 700 or 710 Tubing	DL-L600
	8	Direct-Loc Tee .600 ID - 700 or 710 Tubing	DL-T600
	2	Direct-Loc Coupling .600" ID - 700 or 710 Tubing	DL-C600
	10	Perma-Loc Flow Control/Shut Off Valve	DL-FCV600
	10	Direct-Loc End Cap .600 ID DL x 3/4" MHT w/ Cap - 700 or 710 Tubing	DL-EC600
	1	1/2" x 100' .700 OD Poly Tubing - 100' Roll	DD-DH700-100
	20	1/2" Tubing Mounting Clamp with Nail - Black	DD-MC700B
	1	Hole Punch for 1/4" Barbed Fittings & Drippers	DD-KP
	50	1/4" Barbed Connector	DD-C250
	2	1/4" x 100' Soaker Hose Dripline 6" Spacing 1/2 GPH Dripline Irrigation Emitters - Black Tubing	DD-DET250-6-100
	50	Goof Plug - Dual End 1/4" & 1/8"	DD-GP
	65	Micro Tubing Holder Stake 6" - Multiple sizes .167" to .350" OD	DD-S2
	2	Drip Tubing Hold Down 8" Wire Stake "J Style" fits 1/8" to 3/4" tubing - 25 Pack	TLS6
Optional YBV Connection for Flow Control
	1	Y Ball Valve (2 outlets) 3/4" Female Hose x 3/4" Male Hose	DD-YBV75
	1	Direct-Loc Swivel Adapter .600 ID DL x 3/4" FHT Swivel - 700	DL-FHS600
1/4" Tubing and Connections for Individual Plants
	1	1/4" x 100' Poly Micro Tubing - 100' Roll	DD-DH250-100
	35	Micro Tubing Holder Stake 6" - Multiple sizes .167" to .350" OD	DD-S2
	35	Netafim 1/2 GPH Pressure Compensating Dripper-Emitter - Self Piercing Barb x 1/4" Barb Outlet	DD-SPCV05

*See "Product Options" to Add-on Timers

Click Here for Timer Details

Set Up Illustrations

For installation instructions click here

NOT INCLUDED IN KIT (Additional Optional Products):

	Description	SKU
	Tubing Cutter	TL-TC100
	Punch and Cutter	ANT-PNC
	Vacuum Breaker 3/4" Hose Thread Anti Siphon Backflow Preventer	DD-HVB
	Deluxe Hole Punch Tool for 1/4" Barbed Fittings & Drippers	DD-HP250
	Super Punch for 1/4" Barbed Fittings & Drippers	DD-SP250
	Replacement Filter 150 Mesh for 3/4" & 1" Y Filters	A4-SS155
	Replacement Filter 200 Mesh for 3/4" & 1" Y Filters	A4-SS200
	Hose Washer	DD-HW