When Cannabis plants are grown on the floor you can either have the header elevated or on the floor.  For this example we have designed the header on the floor using the same 3/4" Drip Tubing as we are using for the lateral runs to the plants which enables the use of Dawn Quick Tap Saddles to create the T to the Lateral Line.  Quick Tap Saddles are a simple way to creat a T without having to cut any tubing resulting in a clean set up while saving time on assembly.

Pump Layout 

• 1436- 010 -1" x 3/4" Reducing Male Adapter Mipt x Reducing Insert PVC Fitting
• NDS CV-100-FF -NDSPRO Adjustable Check Valve
• BLFLEX-1FT - 1" Black Flex Tubing For Table Hook Ups
• 1436-131- 1" x 3/4" Reducing Male Adapter Mipt x Reducing Insert PVC Fitting
• YELFLEX- FT -3/4" Flex Tubing for Cannabis Table Hook Ups | Per Ft
• Pump Assembly 

Line Layout

• 1435-007 -3/4" Female Adapter Fipt x Insert PVC Fitting
• A1- H8TH75 -Direct-Loc 3/4" Male Adapter .820 ID EL x 3/4" MPT
• DD-DH940-100 - 3/4" x 100' .940 OD Poly Tubing - 100' Roll.
• KT007D- Dawn Kwik Tap Saddle Tee 3/4" x 3/4" FPT
• A2-VHF8TH75 -Perma-Loc High Flow Control/Shut Off Valve w/3/4" MPT

Table Assembly

• 01WPCJL12 -3.2 GPH Netafim Woodpecker Pressure Compensating Drip Emitter
• ANTCFDDWN - Antelco CFD Downspray Spray Assembly
• A2- H8FVL or A1-H8CAP  Perma-Loc Low Flow Flush Valve  OR 3/4" Perma-Loc End Cap with FHT Removable Cap

**Prices are subject to change**

Ref 10200