| CANIRR20 KIT CONTENTS AND INSTRUCTIONS | Photo | Code | Description | Quantity | | | | Water Source Connections | | |  | DD-HVB | Vacuum Breaker ¾”Hose Thread Anti Siphon Backflow Preventer for Drip Irrigation | 1 | | 
| A4-HTF200 | Y Filter ¾” Female Hose Swivel x Male Hose 200 Mesh Stainless Steel Screen | 1 | | 
| DD-HPR25 | Pressure Regulator 25 PSI – Hose Threaded ¾” FHT x ¾” MHT – High Quality Model | 1 | |  | NDS SAH | ¾” Female Hose Thread x ¼” Barb | 1 | | | | Manifold Assembly | | |  | 01WPCJL8N-B | Woodpecker Junior 2 Gallon Per Hour Emitter For 2 and 4 Way Manifolds | 5 | | 
| 01ADP4WPF-B | Top Flat 4 Way Manifold for Hydroponics and Drip Irrigation | 5 | | 
| C-MANAS24 | 24” Drip Manifold Assembly for Netafim Stacking Manifolds for Cannabis Irrigation | 20 | | | | Tubing and Accessories | | | 
| DD-DH250-100 | Drip Irrigation ¼” x 50 Poly Micro Tubing - 100 ft Roll | 1 | | 
| DD-T250 | Barbed Tee | 5 | | 
| DD-C250 | Drip Irrigation ¼” Barbed Connector | 4 | | 
| DD-GP | Goof Plug – Dual End 1/4” & 1/8” | 10 | |  | DD-S2 | Netafim Drip Tubing Hold Down 6” Stake 1/8” to ¼” Tubing | 5 | CANIRR20 KIT CONTENTS AND INSTRUCTIONS Instructions for Assembly Connecting Water Source Connections All Water Source Connections come with washers so no glue or Teflon Tape is required. The DIG C37B is your connection point to the 1/4” tubing supplied with the kit (See Illustration Below) 
Layout Feeder Line and Emitter Assemblies Layout 1/4” feeder line using stakes to hold in place. - Cut tubing in the location of your first 4 plants and insert a T in between the cut pieces. Repeat this for each 4 pot location.
- On the stem of each T fitting, cut an appropriate length of tubing to insert an emitter.
- Attach 4 Port Manifold on each emitter.
- Insert Drip Assemblies on to Manifold
- Use Goof Plugs as end plugs for line (if necessary), and DD-C250’s for any repairs.
Ref 5030 | 
