1/4" Drip Irrigation Fittings

Direct Drip 1/4" (250) Connector Barb X Barb.  This is one of the common fittings found in drip irrigation.  This fitting is often punched through a solid drip line to create a connection for 1/4" micro tubing.  

Direct Drip 1/4" (250) Elbow Barb x Barb.  Turn corners on your Drip System easily with 1/4" barbed fittings.

40345 - 1/8" Tee Antelco .16" Barb 

Direct Drip 1/4" (250) Tee Barb x Barb x Barb.  A Tee Barbed Fitting can be punched into a 1/2" or 3/4" Solid Drip Hose and will create an outlet for 2 seperate 1/4" drip lines.  Emitters can then be attached to both ends of the 1/4" tubing.

Direct Drip Dual End Goof Plug. NOTE: Always purchase Goof Plugs for your Dirp Irrigation System.  Goof Plugs are used for correcting mistakes when installing a Drip System.  They are also helpful when Drip Irrigation components need to be re-located for changes in plant locations.  Goof Plugs can also be used to plug the end of a 1/4" drip hose.

Direct Drip 1/4" (250) Flow Control Valve Barb x Barb. Used the FCV250 to shut off flow to no longer used Emitters in a Drip Irrigation System

Micro Spray Threaded Adapter 10-32 Thread x 10-32 Thread, this part comes installed on our DD-MJRE8, DD-MJRE12 & DD-MJRE18
 

This fitting is 1/4" Barb x 10-32 Threaded Adapter.  This Drip Irrigation Fitting is used to convert 10-32 Thread to Barb Fittings and can be install on the end of any rigid riser.
 

Micro Spray 12" Rigid Riser with 1/4" Barb Adapter.  Use with MJCS13 to create an adjustable Micro Spray Riser.  10/32 Opening for installation of threaded Micro Sprayers.
 

Drip Irrigation Hole Punch for 1/4" Barb Fittings and Drip Emitters.

Drip Irrigation Economical Hole Punch - 1/4" Barb.

Super Punch 1/4" (250) Professional Drip Tubing Hole Punch.