System Layouts

Here are a few sample layouts for our gravity feed kits.  Use the tips below in your design to help equalize the output of the drip emitters.

Starter Kit Connection Options

Medium Kit Connection Options

Medium Kit	TIP: Close off the ends and attach mainline to center

Large Kit Connection Options

Large Kit                                                           Tip: Close off the ends and attach mainline to center

6. Add Direct-Loc Threaded End Caps (DL-EC600) to the ends of 1/2” drip tubing. Leave the caps off for flushing.

7. Open the Flow Control Valve to turn on the water and FLUSH THE LINE until all lines are clear of debris. Replace the 1/2” threaded end caps at the ends of the 1/2” drip tubing.

Ref 6040