DD-ILE10 - 1 GPH Mini In-Line Drippers Non Pressure Compensating Drip Emitter (C1E8)

Product Description

Mini In-Line Drippers are used with drip irrigation and are inserted into 1/4" tubing. They are installed like a 1/4" coupler. In-line drippers can be installed with the outlet hole on either the upstream or downstream side of the tubing.

1. Make your own 1/4" emitter tubing. You to control the spacing. Cap the end of the 1/4" tubing with a goof plug.
2. Add a little more water where needed. Cut the 1/4" tubing and insert the emitter into each end.

Product Details

• Recommended Operating Pressure: 15 - 20 PSI to maintain 1/2 GPH (gallons per hour) output
• In-line drippers can be installed with the outlet hole on either the upstream or downstream side of the tubing.
• Non-Pressure Compensating Emitter. Water output will increase over 20 PSI.
• 1/4" Barb Inlet and Outlet, use with our 1/4" tubing
• Used to make custom-spaced 1/4" drip emitter tubing
• Excellent for unevenly spaced plants
• Maximum Flow with 1/4" tubing: 30 GPH (60 emitters) per circuit
• Maximum Run for 1/4" tubing: 50 feet per circuit
• 20 PSI Pressure Regulator required to achieve proper flow rate. Hose Threaded 20 psi Regulators & Pipe Threaded 20 psi Regulators available
• Cap end of 1/4" tubing with Goof Plug

Flow rate in gallon per hour @ 5 to 30 PSI

DIG 06-037