Techline Installation Examples

1/2" Poly Tubing to 12mm Techline Tubing

Pressure Compensating Emitters and a simple installation method make the Techline EZ Dripline the consumer choice for DIY installations. Perfect for Shrub Beds and Vegetable Garden Watering. The maximum GPH capacity of the 1/2" supply tubing is 250 GPH. Do not exceed this maximum capacity. 

Techline Tubing is available in the following SKUs:

• 6" Spacing, .26 GPH Output, 300ft Roll
• 6" Spacing, .42 GPH Output, 500ft Roll

• Supply line is 1/2" Poly Tubing and is capped off using 1/2" Permaloc End Caps.
• Rows of 12mm Techline created using 1/2" Insert Tees, 1/2" Gear Clamps and T12050MA fittings.
• Cap the techline tubing with Figure 8 End Caps.
• For flow control on techline, use T12SOV.

1/2" Poly Tubing to 17mm TLDL Techline Tubing

Pressure Compensating Emitters for unparalleled performance. This dripline provides maximum uniformity for both subsurface and on-surface installations. The pressure compensating emitters are ideal for sloping terrains and the anti-siphon feature prevents ingestion of debris into the tubing. The maximum GPH capacity of the 1/2" supply tubing is 250 GPH. Do not exceed this maximum capacity. 

TLDL Tubing is available in 100', 250', 500' rolls.

• Supply line is 1/2" Poly Tubing and is capped off using 1/2" Permaloc End Caps.
• Rows of 17mm Techline created using 17mm Tee fittings.
• Cap the techline tubing with Figure 8 End Caps.
• For flow control, use T17SOV

3/4" Poly Tubing to 12mm Techline Tubing

Pressure Compensating Emitters and a simple installation method make the Techline EZ Dripline the consumer choice for DIY installations. Perfect for Shrub Beds, and Vegetable Garden Watering. The maximum GPH capacity of the 3/4" supply tubing is 450 GPH. Do not exceed this maximum capacity. 

Techline Tubing is available in the following SKUs:

• 6" Spacing, .26 GPH Output, 300ft Roll
• 6" Spacing, .42 GPH Output, 500ft Roll

• Supply line is 3/4" Poly Tubing and is capped off using 3/4" Permaloc End Caps.
• Rows of 12mm Techline created using KT007C KWIK Tap Saddles and T12050MA fittings. No cutting of tubing needed with the kwik tap saddles. 
• Cap the techline tubing with Figure 8 End Caps.
• For flow control on techline, use T12SOV.

3/4" Poly Tubing to 17mm TLDL Techline Tubing

Pressure Compensating Emitters for unparalleled performance. This dripline provides maximum uniformity for both subsurface and on-surface installations. The pressure compensating emitters are ideal for sloping terrains and the anti-siphon feature prevents ingestion of debris into the tubing. The maximum GPH capacity of the 1/2" supply tubing is 450 GPH. Do not exceed this maximum capacity. 

TLDL Tubing is available in 100', 250', 500' rolls.

• Supply line is 3/4" Poly Tubing and is capped off using 3/4" Permaloc End Caps.
• Rows of 17mm Techline created using KT007C KWIK Tap Saddles and T12050MA fittings. No cutting of tubing needed with the kwik tap saddles. 
• Cap the techline tubing with Figure 8 End Caps.
• For flow control, use T17SOV